Nitrile Rubber Covered Flat Discharge Hose , 8 Inch 660ft BP Flat Discharge Hose

Nitrile Rubber Covered Layflat Discharge Hose 8inch 30bar BP

Construction: Circular polyester weave extruded internally and externally with NBR-PVC.

Hose shall be made from 100% high tenacity synthetic yarn circular woven and completely, protected and locked-in by tough highly resistant synthetic nitrile rubber, forming a single homogenous construction without the use of glues or adhesives of any type.

Lining Properties:
a. Ultimate Tensile Strength:
Tensile strength of the lining and cover shall not be less than 1500 psi (10,500 kpa ).
b. Ultimate Elongation:
400% minimum.
c. Accelerated Aging Test

The tensile strength and ultimate elongation of the vulcanized rubber compound which has been subjected to the action of oxygen at a pressure of 300 psi +/- 10 psi , (2100kpa +/- 70kpa) and temperature of 70 degrees centigrade +/-1 degree centigrade (158 F +/- 18 F ) for a period of 96 hours shall be , greater than 60% of the original properties stated.

Color:Black ribbed
Temperature range:From -20 C deg to 80 C deg (-4 F deg to 176 F deg)
Elongation at WP:<1.5%
Expansion at WP:<6%
Abrasion:6000 DIN cycles

Standard Length: 660ft

Applications:

• Washdown

• Drainage pumps

• Water Discharge

• Drainage

• Irrigation installations

• Pumping of sludge and liquid fertilizers

• Temporary installations (by-passes)

*Not recommended or approved for fire fighting or frac water transferring.

Recommended for Industrial Water Discharge Solution.

Comparable to

Oroflex 10 of Tipsa, Superflow of Key, etc.